Tag
Showing 12 articles.
welding-machines
Thinking about welding aluminum with your MIG machine and a spool gun? Not every multi-process welder is actually wired to make it work. Here's how to find the
·9 min read
welding-machines
Shopping for a stick welder by peak amps alone is a trap. Here's what duty cycle and voltage reduction devices actually tell you about real-world performance —
·9 min read
welding-machines
Running a 110V flux-core welder at home? Here's how to match your machine's real amperage output to the steel you're actually welding — so you stop guessing
·9 min read
Dmitri Halvorsen
Burning through thin stainless or chrome-moly tubing is a rite of passage — DC pulse TIG solves it by giving you precise control over heat input. Here's how
·9 min read
gear-and-consumables
The four numbers on your auto-darkening welding helmet lens matter more than most welders realize. Here's what each digit means, how the ratings compare, and
·10 min read
welding-machines
Buying three separate welders feels like the 'right' way to build a shop — until you do the math. Here's how multi-process machines stack up on total cost
·9 min read
welding-machines
Running a small shop and trying to choose between Miller and Lincoln for your next multi-process welder? Here's an honest, spec-level comparison of the
·10 min read
gear-and-consumables
Choosing a professional auto-darkening welding helmet is a real safety and productivity decision. Here's how Miller, Lincoln, and ESAB's flagship lenses stack
·9 min read
welding-machines
Multi-process machines that weld and plasma-cut from a single unit sound like a dream for small shops — but the tradeoffs are real. Here's how to decide if a
·9 min read
gear-and-consumables
Choosing between TIG and MIG gloves isn't just about comfort — it directly affects weld quality, safety, and what you can bill for. Here's how to pick the
·10 min read
welding-machines
That duty cycle number stamped on your budget welder's label tells only part of the story. Here's what it actually means in a real shop — and how to decide
·9 min read
welding-machines
AC balance is the single most misunderstood spec on any aluminum TIG welder — here's what it actually means, how to compare machines, and which setting range
·9 min read